Wireless Terminal

Key Specifications/Special Features:

• Provides 4 lines wireless access of GSM/CDMA network, connect with normal phone, PBX or FXO VoIP
• CDMA: CDMA2000 1X, backforward compatible IS-95A
• CDMA800: transmit 824 to 829MHz, receive 869 to 894MHz
• CDMA1900: transmit 1,850 to 1,910MHz receive 1,930 to 1,990MHz
• GSM:
  • GSM900: transmit 880 to 915MHz, receive 925 to 960MHz
  • GSM1800: transmit 1,710 to 1,785MHz, receive 1,805 to 1,880MHz
• Power supports 220V AC and 48V DC
• One 16-pin port is used for connecting 2/3/4 pieces of S1804 to 8/12/16 ports
• One RS232 connects NMS to charge billing or configure parameter
• Four individual SMA-KY antenna interfaces have high signal sensitivity, little interference
• The indicator of signal intensity
• LED: PWR1 and PWR2,each of them has three lights which denote state, run, billing
• Four-standard RJ11 ports are used for connecting with DTMF phones
• Console port is used for connecting with fixed wireless billing system of S1804 (billing meter)
• Multicharging modes: console port, S1804 billing meter, reverse polarity billing
• Flexible tariff modes
• Can saves 20000 particular calls list when power of S1804 cuts off
• Meter billing can monitor 8 phones at the same time
• Meter billing supports billing statistic about latest 8 days and 4 months, and one person multicalling
• The mode of configuration and maintenance: console NMS, remote SMS
• Supports lock of terminal and card, locks-in the subdistrict
• Supports PIN code protection
• Automatically adds IP numbers, and supports 8 digits length
• Automatically adds area numbers, and supports 8 digits length
• Supports DTMF phone caller ID
• Supports 512 area numbers
• Supports 100 barred numbers
• Accurate charging by signal or bidirectional voice detection
• Provides reverse charge signal to connect meter